MIG Welders TIG Welders Stick Welders Engine Driven Plasma Cutters Gas Apparatus Helmets Tools Apparel Safety Parts & Consumables
Save Phace Helmets Welding Jackets Viking 1740 Helmet Hobart Handler 125 specials
See Save Phace Helmets $25.00 $89.00 Three Sizes $595.00
FREE SHIPPING ON ALL ORDERS THROUGHOUT THE USA'S 48 CONTIGUOUS STATES
Home Customer Support Shipping Policies Basket Contents Checkout
Visit us on Facebook
SHOP BY BRAND
3M
Hobart
Hypertherm
Lincoln
Miller
Save Phace
Smith
Thermal Dynamics
Tweco
Victor
SHOP BY DEPT
Mig Welders
Tig Welders
Stick Welders
Engine Driven
Plasma Cutters
Cylinders
Gas Apparatus
Welding Helmets
Tools of the Trade
Power Tools
Apparel/Gear
Safety Products
Filler Metals
Parts/Accessories
Training Tools


Free Helmet
Download Details & Rebate Form
See detailed information
about add-on cylinders.

Millermatic 180 Autoset
 
Millermatic 180  Autoset Quantity in Basket: None
Code: 907312
Price: $899.00
 
  Mig-Cart 300425 ADD $95
  Spoolmate 100 ADD $239
  Canvas Cover ADD $42
  ArcStation 300837 Add $285
  Consumables Kit (023 Wire) ADD $25
  Consumables Kit (030 Wire) ADD $25
  Consumables Kit (035 Wire) ADD $25
Add-on Cylinders:
 
Quantity:
 

Millermatic® 180 - NOW WITH AUTOSET FEATURE!
All-in-one wire welding package welds 24 gauge - 5/16 in (0.8 - 7.9 mm) mild steel.

Add On Accessories Details:

 
Spoolmate 100 Spoolgun Consumables Kits for M-10 and M-15 Guns
(023, 030, or 035 Wire)

Features:

  • New! Auto-Set™ is a breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG, minus the guesswork!
  • Welds thickest material in its class, with the highest output in its class! Can weld up to 5/16 inch in a single pass.
  • New spool gun compatible! Finally a reliable and economical way to weld aluminum. Hooked up to a Millermatic 180 or 180 with Auto-Set, the new Spoolmate 100 Series spool gun allows you to weld from 18 gauge to 1/4 inch aluminum.
  • Manual Mode has the flexibility to manually set weld parameters for broader applications. 
  • Infinite voltage control with Manual On/Off wire feed speed tracking provides a broader operating range with finer control by automatically increasing or decreasing wire feed speed when voltage is adjusted (unit shipped with wire feed speed tracking set to "off").
  • Durable cast aluminum feedhead incorporates dual groove quick-change drive roll and spring-loaded tension arm with calibrated tension knob all designed to make setup easier and faster.
  • Thermal overload protection shuts down the unit and activates over temperature light if airflow is blocked or duty cycle is exceeded. Automatically resets when fault is corrected and unit cools.
  • Miller's exclusive "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends contact tip life and protects internal components from damage. Trigger reset permits quick reset at torch rather than unit.
  • Standard built-in solid-state contactor circuit makes wire electrically "cold" until trigger is pulled. Makes unit safer, and is easier to position torch to work before starting weld.
  • Easy access to output studs provides convenient polarity changeover when switching from solid or flux cored wires.
  • Self-resetting motor protection circuit eliminates the need to find and replace fuses.
  • Uses 4 or 8 in (102 or 203 mm) spools and can be set up to weld with wire sizes .024-.035 in (0.6-0.9 mm) mild/stainless steel and .030-.045 in (0.8-1.2 mm) flux cored.

Process
MIG (GMAW) 
Flux Cored (FCAW) (gas and self-shielded) 

Applications
Light Industrial Applications
Light Fabrication 
Maintenance and Repair 
Auto Body 
Farm and Ranch 
Home 

Specifications

Input Power
Requires 1-Phase Power 
230 V, 21.7 A, 60 Hz 

Rated Output
135 A at 22.5 VDC, 30% Duty Cycle 

Welding Amperage Range
30 - 180 Amps 

Wire Speed 
90 - 700 IPM (2.3 - 17.8 m/min) 

Net Weight
72 lb (33 kg) 

Comes Complete With

  • 10 ft (3 m) M-10 Miller MIG gun 

  • 10 ft (3 m) work cable with clamp 

  • Factory-installed gas solenoid valve 

  • Smith® Argon and AR/CO2 mix regulator/flow gauge and gas hose 

  • 6 ft (1.8 m) power cord and plug 

  • Two contact tips for .024 in (0.6 mm) wire and two contact tips for .030 in (0.8 mm) wire 

  • Dual groove quick-change drive roll for .024 in (0.6 mm) or .030/.035 in (0.8/0.9 mm) wire 

  • Spool of Hobart® .030 in (0.8 mm) solid wire 

  • Information/settings chart 

  • Set-up and operation video



Related Item(s)
Code Name Price  
00006X Miller/Hobart Contact Tips $0.99
TIL1150 Tillman 1150 Stick/Mig Gloves $10.95
ER70S-6 Mig Welding Wire - ER70S-6 $0.00
E71TGS Mig Flux Cored (Gasless) Wire $0.00
6225 Anti Spatter Spray $5.25
NOZDIP Nozzle Dip $5.90
YS-50 Welders Helper Plier / Welpers $26.99
8214 3M 8214 Disposable Welding Respirator $8.92

Home | Customer Support | Shipping Policies | Shopping Cart | Checkout


© Copyright 1999-2011, Welders Direct, Internet Sales Division of Central Welding Supply Co. Inc. All Rights Reserved.
PO Box 179, North Lakewood, WA 98259 Phone: (360) 658-5617